World Class Manufacturer of Custom Switches, Connectors & Assemblies
Certifications
Search Catalog
      GO   
 All Categories    2000 Series Illuminated Full Size Rocker Switches
All Categories > Switches > Rocker Switches > Full Size Rocker Switches > 2000 Series Full Size Rocker Switches > 2000 Series Illuminated Full Size Rocker Switches > Item # GRL-2011-0009  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # GRL-2011-0009, 2000 Series Illuminated Full Size Rocker Switches







Check Distributor Stock  · Specifications  · Materials  · Operating Standards

Check Distributor Stock

Check Distributor Stock

DIGI-KEY


Specifications

Circuitry

SPST

Switch Function

ON-OFF

Electrical Ratings1

10 A @ 14 V (T)
12 A @ 250 VAC

16 A @ 125 VAC

3/4 HP @ 125-250 VAC

Mounting

Snaps easily into a 0.550" (13.97 mm) x 1.125" (28.58 mm) panel cutout ranging in thickness from 0.025" (0.64 mm) to 0.170" (4.32 mm). No need for tools or additional hardware.

CAUTION: Burr direction must be away from the direction of insertion.

Mounting Polarization

None

Actuator Color

Red

Actuator Legend

None

Illumination

Illuminated - Neon 125V

Housing Color

Black

Insulating Barriers

( X ) Between Terminals   ( _ ) No Barriers

Terminal

0.250 x 0.032in.      6.35 x 0.81mm.   Quick Connect

Contact Action

Sliding with Self Cleaning Contacts

Listing Agency
(Consult drawing or factory for specific rating)2

Compliance

1 Additional ratings may be available, contact us for more information.
2 Due to ongoing advancements, additional agency certifications may be available, contact us for more information.


Materials

Rocker Knob

Translucent Nylon 6/6 (Optional)
Transparent Polycarbonate (Standard)

Rocker Lamp

High intensity neon lamp type A1C with 1/4 watt 22 kΩ resistor, with 10,000 hours of life for 125 volt applications (Standard)

Housing & Terminal Board

Nylon 94V-2

Terminal & Moving Contact

Copper


Operating Standards
Endurance:
100,000 cycles, no load, minimum
25,000 cycles at rated load minimum
Contact Resistance:
Less than 0.01 Ω at 10 mA
Operating Temperature:
From -20ºC to 105ºC maximum.
Consult factory for higher or lower temperature ranges
High Voltage Dielectric Withstanding Voltage:
2,500 V, 60 Hz for 1 minute between mounting surface and circuit connections (min.)
Relative Humidity:
Insulation resistance > 103 MΩ after 100 hours at 95% R.H. and 50ºC followed by 1 hour dry at ambient room conditions

Operating Standards described herein are general specifications that vary depending on the switch construction specified and end application. Contact us for specifications for specific models. Specifications subject to change without notice.



 MORE IMAGES 

·  Features of 2000 Series Illuminated Rocker Switches


 DOWNLOADS 

2000 Series Illuminated Rocker Switches - (GRL-2011 Series)
(PDF, 56KB)

GRL-2011-0009
(PDF, 120KB)

2000SeriesWireDiagram
(PDF, 203KB)

Switch Selection Guide
(PDF, 2917KB)


CW INDUSTRIES
130 James Way - Southampton, PA 18966
215-355-7080 | fax: 215-355-1088 | info@cwind.com
Legal | Sitemap | Catalog Index
© 2011 CW Industries - All Rights Reserved