World Class Manufacturer of Custom Switches, Connectors & Assemblies
Certifications
Search Catalog
      GO   
 All Categories    4000 Series Momentary Miniature Rocker Switches
All Categories > Switches > Rocker Switches > Miniature Rocker Switches > 4000 Series Miniature Rocker Switches > 4000 Series Momentary Miniature Rocker Switches > Item # GRS-4011B-0014  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # GRS-4011B-0014, 4000 Series Momentary Miniature Rocker Switches








Check Distributor Stock  · Specifications  · Materials  · Operating Standards

Check Distributor Stock

Check Distributor Stock

DIGI-KEY


Specifications

Circuitry

SPST

Switch Function

OFF-(ON)

Electrical Ratings1

1/2 HP @ 125-250 VAC
10 A @ 250 VAC

13 A @ 125 VAC

5 A @ 14 V (T)

Temperature Rating

+ 65 Max. Degrees C

Panel Opening

0.508 x 0.756 in
12.90 x 19.20
mm

Acceptable Panel Thickness

0.050 - 0.150 in
1.27 - 3.81
mm

Mounting

Self locks without hardware when inserted into a 0.756" (19.20 mm) x 0.508" (12.90 mm) panel cutout. Acceptable panel thickness range is from 0.050" (1.27 mm) to 0.150" (3.81 mm).

CAUTION: Burr direction must be away from the direction of insertion.

Mounting Polarization

None

Actuator Color

Black

Actuator Legend

None

Illumination

Non Illuminated

Housing Color

Black

Insulating Barriers

(X) Between Poles     (X) Between Terminals     ( _ ) No Barriers

Terminal

(X) 0.187 x 0.032in.      4.75 x 0.81mm.  Quick Connect
(_) 0.187 x 0.020in.       4.75 x 0.51mm.   Quick Connect
(_) 0.110 x 0.032in.       2.79 x 0.81mm.    Quick Connect
(_) 0.110 x 0.032in.       2.79 x 0.81mm.    Solder Terminal

Contact Action

Sliding with Self Cleaning Contacts

Listing Agency
(Consult drawing or factory for specific rating)2

Compliance

1 All ratings are on a load per pole, opposite polarity basis. Additional ratings may be available, contact us for more information.
Switches marked µ are acceptable for use as power switches provided there is a plug disconnect or a switch with open contact gaps of 3 mm minimum.
2 Due to ongoing advancements, additional agency certifications may be available, contact us for more information.


Materials

Rocker Knob

Nylon 94V-2

Housing

Nylon 94V-2

Terminal & Moving Contact

Copper Alloy or
Copper Alloy Silver Plated


Operating Standards
Endurance:
100,000 cycles, no load, minimum
25,000 cycles at rated load minimum up to 16 A @ 125 VAC
10,000 cycles at rated load minimum 16 A @ 250 VAC
Contact Resistance:
Less than 0.01 Ω at 10 mA (Initial)
Operating Temperature:
From -20ºC to 105ºC maximum.
Consult factory for higher or lower temperature ranges.
High Voltage Dielectric Withstanding Voltage:
2,500 V, 60 Hz for 1 minute between mounting surface and circuit connections
Humidity:
Insulation resistance > 103 MΩ after 100 hours at 95% R.H. and 50ºC followed by 1 hour dry at ambient room conditions

Operating Standards described herein are general specifications that vary depending on the switch construction specified and end application. Contact us for specifications for specific models. Specifications subject to change without notice.



 MORE IMAGES 

·  Features of 4000 Series Mini-Rocker Switches


 DOWNLOADS 

4000 Series Momentary Mini-Rocker Switches - (GRS-4011B Series)
(PDF, 87KB)

3D DWG 4000 SERIES
(Not Compatible with Internet Explorer)

(STP, 696KB)

Switch Selection Guide
(PDF, 2917KB)


CW INDUSTRIES
130 James Way - Southampton, PA 18966
215-355-7080 | fax: 215-355-1088 | info@cwind.com
Legal | Sitemap | Catalog Index
© 2011 CW Industries - All Rights Reserved