World Class Manufacturer of Custom Switches, Connectors & Assemblies
Certifications
Search Catalog
      GO   
 All Categories    DIP Connectors - MIL SPEC
All Categories > Connectors > Insulation Displacement Connectors - Commercial & MIL SPEC > Insulation Displacement Connectors - MIL SPEC > DIP Connectors - MIL SPEC > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

DIP Connectors - MIL SPEC

Check up to five results to perform an action.

CW DIP connectors are MIL-DTL-83503/6 approved and typically used for rapid, permanent connection of ribbon cable to a PC board or to a standard DIP socket when connect/disconnect capabilities are required. The cover is factory pre-assembled to the connector base to simplify assembly to cable and has ridges for cable alignment.

CW’s DIP connectors feature a one piece construction in 14, 16, 24 and 40 pin versions. Our patented Torq-Tite™ contacts ensure reliable gas-tight terminations and accept 28-30AWG stranded or solid conductors. Optional strain reliefs are easily installed. Every contact position is numbered per MIL-DTL-83503 for easy identification.


Search Items


Compare Items
   
  Results 1 - 3 of 3 1 

Item #

MIL SPEC P/N

Terminal

Plating

Number of Contacts

Approved By

CWR-130-14-0002 M83503/6-01 0.175" Terminal Posts 50µ in. Gold Over 50µ in. Nickel 14 US Department of Defense MIL-DTL-83503
CWR-130-16-0002 M83503/6-02 0.175" Terminal Posts 50µ in. Gold Over 50µ in. Nickel 16 US Department of Defense MIL-DTL-83503
CWR-130-24-0002 M83503/6-03 0.175" Terminal Posts 50µ in. Gold Over 50µ in. Nickel 24 US Department of Defense MIL-DTL-83503
  Results 1 - 3 of 3 1 
CW INDUSTRIES
130 James Way - Southampton, PA 18966
215-355-7080 | fax: 215-355-1088 | info@cwind.com
Legal | Sitemap | Catalog Index
© 2011 CW Industries - All Rights Reserved