(9)
CW’s socket connectors meet MIL-DTL-83503/7 specifications and are listed on the U.S. Defense Department’s Qualified Products List. These connectors are typically used to interconnect PC boards or points on a backplane through headers or pins on 0.100 in. x 0.100 in. spacing. They feature an advanced mechanical design which includes CW's patented offset-tine (Torq-Tite™) contact for positive gas-tight cable termination. The nose end of the contact provides a long, dual cantilever for a longer wiping action and improved self-cleaning of the mating pin. The extra length also results in a longer and more reliable working life.
(108)
CW headers are Mil-DTL-83503/20, 21, 24 and 25 approved and are often permanently mounted to PC boards and mate with female socket connectors having a 0.100 in. (2.54 mm) x 0.100 in. (2.54 mm) contact spacing. The headers have male pins on their mating side and offer the designer a choice of either wire-wrap or solder posts in various lengths on the opposing end.
You can specify either straight or right-angle contacts that allow sockets to mate with headers at right angles or parallel to mating PC board or wire-wrap plane. Optional ejection latches in various sizes are available, to mate with strain relief or non-strain relief sockets.
Polarization ribs are securely molded into place, eliminating the need for gluing ...
(16)
CW D-Subminiature connectors meet the stringent specifications of MIL-DTL-83503. We offer four sizes of each of two D-Subminiature types…pin and socket versions, each mating to standard 9, 15, 25 and 37 conductive cable. Interchangeable with other D-Subminiature standards, all CW D-Subminiature connectors incorporate two basic series of patents assuring contact integrity.
The D-Subminiature Insulation Displacement Connector is a popular standard for connecting many types of electronic equipment - computer and peripherals, instruments, telecommunications and test equipment in both commercial and military applications.
Our D-Subminiature connectors with metal face are ideal for input/output applications and ...
(3)
CW DIP connectors are MIL-DTL-83503/6 approved and typically used for rapid, permanent connection of ribbon cable to a PC board or to a standard DIP socket when connect/disconnect capabilities are required. The cover is factory pre-assembled to the connector base to simplify assembly to cable and has ridges for cable alignment.
CW’s DIP connectors feature a one piece construction in 14, 16, 24 and 40 pin versions. Our patented Torq-Tite™ contacts ensure reliable gas-tight terminations and accept 28-30AWG stranded or solid conductors. Optional strain reliefs are easily installed. Every contact position is numbered per MIL-DTL-83503 for easy identification.
(12)
CW's PCB connectors are approved by the U.S. Defense Department and are qualified to MIL-DTL-83503/23 and available in 10, 20, 26, 34, 40, and 50 pin versions, with or without strain relief. These accept 28-30 AWG stranded or solid conductors and are plated with gold over nickel.
The PCB connector is used when a permanent connection of flat cable to the PC board is required. The cable is terminated to the PCB connector making a reliable gas-tight connection with CW's patented Torq-Tite™ contacts. The connector's pins are then soldered to the board.
