Home
|
About Us
|
Capabilities
|
Markets Served
|
Quality Assurance
|
Literature
|
Distributor & Rep Locator
|
What's New
|
Contact Us
Switches
Indicator Lights
Connectors
Defense/Aerospace Connectors
Contract Manufacturing
Custom Assembly
Custom Switches and Connectors
Search Catalog
By Keyword
By Item #
All Categories
4000 Series Center-Off Miniature Rocker Switches
All Categories
>
Switches
>
Rocker Switches
>
Miniature Rocker Switches
>
4000 Series Miniature Rocker Switches
>
4000 Series Center-Off Miniature Rocker Switches
>
Item # GRS-4023A-0001
Download PDF
Download PDF
Printable Page
Email This Page
Save To Favorites
Please wait…
Item # GRS-4023A-0001, 4000 Series Center-Off Miniature Rocker Switches
larger image
Check Distributor Stock
·
Specifications
·
Materials
·
Operating Standards
Check Distributor Stock
Check Distributor Stock
DIGI-KEY
Specifications
Circuitry
DPDT-CO
Switch Function
ON-OFF-ON
Electrical Ratings
1
3 A @ 277 VAC
4 A @ 250 VAC
8 A @ 125 VAC
Panel Opening
0.508 x 0.756
in
12.90 x 19.20
mm
Acceptable Panel Thickness
0.050 - 0.150
in
1.27 - 3.81
mm
Mounting
Self locks without hardware when insered into a 0.756" (19.20 mm) x 0.508" (12.90 mm) panel cutout. Acceptable panel thickness range is from 0.050" (1.27 mm) to 0.150" (3.81 mm).
CAUTION:
Burr direction must be away from the direction of insertion.
Mounting Polarization
None
Actuator Color
Black
Actuator Legend
None
Illumination
Non Illuminated
Housing Color
Black
Insulating Barriers
(X) Between Poles
( _ ) Between Terminals ( _ ) No Barriers
Terminal
(X) 0.187 x 0.032in. 4.75 x 0.81mm. Quick Connect
(_) 0.187 x 0.020in. 4.75 x 0.51mm. Quick Connect
(_) 0.110 x 0.032in. 2.79 x 0.81mm. Quick Connect
(_) 0.110 x 0.032in. 2.79 x 0.81mm. Solder Terminal
Contact Action
Sliding with Self Cleaning Contacts
Listing Agency
(Consult drawing or factory for specific rating)
2
Listed Agencies
Compliance
.
1
All ratings are on a load per pole, opposite polarity basis.
Switches marked µ are acceptable for use as power switches provided there is a plug disconnect or a switch with open contact gaps of 3 mm minimum.
2
Due to ongoing advancements, additional agency certifications may be available, contact us for more information.
Materials
Rocker Knob
Nylon 94V-2
Housing
Nylon 94V-2
Terminal & Moving Contact
Copper Alloy or
Copper Alloy Silver Plated
Operating Standards
Endurance:
100,000 cycles, no load, minimum
25,000 cycles at rated load minimum up to 16 A @ 125 VAC
10,000 cycles at rated load minimum 16 A @ 250 VAC
Contact Resistance:
Less than 0.01 Ω at 10 mA (Initial)
Operating Temperature:
From -20ºC to 105ºC maximum.
Consult factory for higher or lower temperature ranges.
High Voltage Dielectric Withstanding Voltage:
2,500 V, 60 Hz for 1 minute between mounting surface and circuit connections
Humidity:
Insulation resistance > 10
3
MΩ after 100 hours at 95% R.H. and 50ºC followed by 1 hour dry at ambient room conditions
Operating Standards
described herein are general specifications that vary depending on the switch construction specified and end application. Contact us for specifications for specific models. Specifications subject to change without notice.
MORE IMAGES
·
Features of 4000 Series Mini-Rocker Switches
DOWNLOADS
4000 Series Center-Off Mini-Rocker Switches - (GRS-4023A/B/C Series)
(PDF, 94KB)
3D DWG 4000 SERIES
(Not Compatible with Internet Explorer)
(STP, 696KB)
Switch Selection Guide
(PDF, 2917KB)
