Home
|
About Us
|
Capabilities
|
Markets Served
|
Quality Assurance
|
Literature
|
Distributor & Rep Locator
|
What's New
|
Contact Us
Switches
Indicator Lights
Connectors
Defense/Aerospace Connectors
Contract Manufacturing
Custom Assembly
Custom Switches and Connectors
Search Catalog
By Keyword
By Item #
All Categories
4000 Series Illuminated Miniature Rocker Switches
All Categories
>
Switches
>
Rocker Switches
>
Miniature Rocker Switches
>
4000 Series Miniature Rocker Switches
>
4000 Series Illuminated Miniature Rocker Switches
>
Item # GRL-4021-0007
Download PDF
Download PDF
Printable Page
Email This Page
Save To Favorites
Please wait…
Item # GRL-4021-0007, 4000 Series Illuminated Miniature Rocker Switches
larger image
Check Distributor Stock
·
Specifications
·
Materials
·
Operating Standards
Check Distributor Stock
Check Distributor Stock
DIGI-KEY
Specifications
Circuitry
DPST
Switch Function
ON-OFF
Electrical Ratings
1
10 A @ 14 V (T)
16 A @ 125-250 VAC
3 A @ 125 V (L)
3/4 HP @ 125-250 VAC
NEON
Acceptable Panel Thickness
0.050 - 0.150
in
1.27 - 3.81
mm
Mounting
Self locks without hardware when insered into a 0.756" (19.20 mm) x 0.508" (12.90 mm) panel cutout. Acceptable panel thickness range is from 0.050" (1.27 mm) to 0.150" (3.81 mm).
CAUTION:
Burr direction must be away from the direction of insertion.
Mounting Polarization
None
Actuator Color
Red
Actuator Legend
None
Illumination
Illuminated
Housing Color
Black
Insulating Barriers
(X) Between Poles
( _ ) Between Terminals ( _ ) No Barriers
Terminal
(X) 0.187 x 0.032in. 4.75 x 0.81mm. Quick Connect
(_) 0.187 x 0.020in. 4.75 x 0.51mm. Quick Connect
(_) 0.110 x 0.032in. 2.79 x 0.81mm. Quick Connect
(_) 0.110 x 0.032in. 2.79 x 0.81mm. Solder Terminal
Contact Action
Sliding with Self Cleaning Contacts
Listing Agency
(Consult drawing or factory for specific rating)
2
Listed Agencies
Compliance
.
1
All ratings are on a load per pole, opposite polarity basis. Additional ratings may be available, contact us for more information.
2
Due to ongoing advancements, additional agency certifications may be available, contact us for more information.
Materials
Rocker Knob
Translucent Nylon 6/6 (Optional)
Transparent Polycarbonate (Standard)
Rocker Lamp
High intensity neon lamp type NE-38 with 1/8 watt 47 kΩ resistor, 10,000 hour life for 125 volt applications (standard)
Housing
Nylon 94V-2
Terminal & Moving Contact
Copper Alloy or
Copper Alloy Silver Plated
Operating Standards
Endurance:
100,000 cycles, no load, minimum
25,000 cycles at rated load minimum up to 16 A @ 125 VAC
10,000 cycles at rated load minimum 16 A @ 250 VAC
Contact Resistance:
Less than 0.01 Ω at 10 mA (Initial)
Operating Temperature:
From -20ºC to 105ºC maximum.
Consult factory for higher or lower temperature ranges.
High Voltage Dielectric Withstanding Voltage:
2,500 V, 60 Hz for 1 minute between mounting surface and circuit connections
Humidity:
Insulation resistance > 10
3
MΩ after 100 hours at 95% R.H. and 50ºC followed by 1 hour dry at ambient room conditions
Operating Standards
described herein are general specifications that vary depending on the switch construction specified and end application. Contact us for specifications for specific models. Specifications subject to change without notice.
MORE IMAGES
·
Features of 4000 Series Illuminated Mini-Rocker Switches
DOWNLOADS
4000 Series Illuminated Mini-Rocker Switches - (GRL-4021 Series)
(PDF, 91KB)
4000SeriesWireDiagram
(PDF, 197KB)
3D DWG 4000 SERIES
(Not Compatible with Internet Explorer)
(STP, 696KB)
Switch Selection Guide
(PDF, 2917KB)
