Item # GRS-4011-0000, 4000 Series Maintained Action Miniature Rocker Switches On CW Industries

World Class Manufacturer of Custom Switches, Connectors & Assemblies

Switches

Indicator Lights

Connectors

Defense/Aerospace Connectors

Contract Manufacturing

Custom Assembly

Custom Switches and Connectors

Search Catalog



	All Categories 4000 Series Maintained Action Miniature Rocker Switches

All Categories > Switches > Rocker Switches > Miniature Rocker Switches > 4000 Series Miniature Rocker Switches > 4000 Series Maintained Action Miniature Rocker Switches > Item # GRS-4011-0000


	Item # GRS-4011-0000, 4000 Series Maintained Action Miniature Rocker Switches

larger image

Check Distributor Stock · Specifications · Materials · Operating Standards

Check Distributor Stock

Check Distributor Stock		DIGI-KEY MOUSER

Specifications

Circuitry

SPST

Switch Function

ON-OFF

Electrical Ratings¹

1/2 HP @ 125-250 VAC
10 A @ 250 VAC
13 A @ 125 VAC
5 A @ 14 V (T)

Temperature Rating

+65 Max. Degrees C

Panel Opening

0.508 x 0.756 in
12.90 x 19.20 mm

Acceptable Panel Thickness

0.050 - 0.150 in
1.27 - 3.81 mm

Mounting

Self locks without hardware when inserted into a 0.756" (19.20 mm) x 0.508" (12.90 mm) panel cutout. Acceptable panel thickness range is from 0.050" (1.27 mm) to 0.150" (3.81 mm).

CAUTION: Burr direction must be away from the direction of insertion.

Mounting Polarization

None

Actuator Color

Black

Actuator Legend

None

Illumination

Non Illuminated

Housing Color

Black

Insulating Barriers

(X) Between Poles ( _ ) Between Terminals ( _ ) No Barriers

Terminal

(X) 0.187 x 0.032in.    4.75 x 0.81mm.   Quick Connect
(_) 0.187 x 0.020in.       4.75 x 0.51mm.   Quick Connect
(_) 0.110 x 0.032in.       2.79 x 0.81mm.    Quick Connect
(_) 0.110 x 0.032in.       2.79 x 0.81mm.    Solder Terminal

Contact Action

Sliding with Self Cleaning Contacts

Listing Agency
(Consult drawing or factory for specific rating)²

Listed Agencies

Compliance

¹ All ratings are on a load per pole, opposite polarity basis. Additional ratings may be available, contact us for more information.
Switches marked µ are acceptable for use as power switches provided there is a plug disconnect or a switch with open contact gaps of 3 mm minimum.
² Due to ongoing advancements, additional agency certifications may be available, contact us for more information.

Materials

Rocker Knob		Nylon 94V-2

Housing		Nylon 94V-2

Terminal & Moving Contact		Copper Alloy or Copper Alloy Silver Plated

Operating Standards

Endurance:
100,000 cycles, no load, minimum
25,000 cycles at rated load minimum up to 16 A @ 125 VAC
10,000 cycles at rated load minimum 16 A @ 250 VAC
Contact Resistance:
Less than 0.01 Ω at 10 mA (Initial)
Operating Temperature:
From -20ºC to 105ºC maximum.
Consult factory for higher or lower temperature ranges.
High Voltage Dielectric Withstanding Voltage:
2,500 V, 60 Hz for 1 minute between mounting surface and circuit connections
Humidity:
Insulation resistance > 10³ MΩ after 100 hours at 95% R.H. and 50ºC followed by 1 hour dry at ambient room conditions

Operating Standards described herein are general specifications that vary depending on the switch construction specified and end application. Contact us for specifications for specific models. Specifications subject to change without notice.

DOWNLOADS


		GRS-4011-0000 (PDF, 145KB)

		4000 Series Maintained Action Mini-Rocker Switches - (GRS-4011 Series) (PDF, 85KB)

		3D DWG 4000 SERIES (Not Compatible with Internet Explorer) (STP, 696KB)

		Switch Selection Guide (PDF, 2917KB)

CW INDUSTRIES
130 James Way - Southampton, PA 18966
215-355-7080 | fax: 215-355-1088 | info@cwind.com

Item # GRS-4011-0000, 4000 Series Maintained Action Miniature Rocker Switches

Check Distributor Stock