World Class Manufacturer of Custom Switches, Connectors & Assemblies
Search Catalog
 All Categories    Top Actuated Maintained Slide Switches
All Categories > Switches > Slide Switches > Standard Slide Switches > Top Actuated Maintained Slide Switches > Item # GF-324-0126  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # GF-324-0126, GF - Series Single Pole/Double Throw (with Detent) Standard Slide Switch

Check Distributor Stock  · Specifications  · Materials  · Performance Standards  · Care in Switch Installation

Check Distributor Stock

Check Distibutor Stock





Switch Function


Electrical Ratings

0.5 A @ 125 VDC
3 A @ 125 VAC

Actuator Style & Color

Radius Knurled - Black

Actuator Legend


Actuator Height

0.344 in.

Actuator Options

Standard Actuator Options

Topper Options

Standard Actuator Topper Options


4-40 Extruded and Tapped Mounting Holes

Mounting Options

Mounting Options



Termination Options

Slide Switch Terminal Options

Solder Shield

Vulcanized Fiber Shield 0.020" thick that fits over the switch terminals is also available

Listing Agency
(Consult drawing or factory for specific rating)1


1 Due to ongoing advancements, additional agency certifications may be available, contact us for more information.


Button Material

Nylon 6/6


Zinc Plated Cold Rolled Steel

Moving Contact

Copper Alloy

Moving Contact Plating

Silver is standard. Gold plating is an option, consult factory.

Moving Contact Spring

Beryllium Copper or
Phosphor Bronze


Copper Alloy

Terminal Plating

Silver is standard. Gold plating is an option, consult factory.

Terminal Board

NEMA Grade XP Phenolic Laminate


Other materials to suit your application are available if volume is sufficient. Contact us for more information.

Performance Standards
CW switches are designed to perform to the standards listed when operated within ambient conditions detailed below:
Operating Temperature - 105ºC maximum, -20ºC minimum.
Relative Humidity - Switches will be operable and insulation resistance shall be greater than 100 megohms if allowed to dry for 100 hours at room temperature of 25ºC and after exposure for one hour in an atmosphere having 95% relative humidity and a temperature of 50ºC
High Voltage Breakdown - Minimum of 1000 volts RMS 60 Hz for one minute between parts of opposite polarity.
Contact Resistance - Less than 0.01 ohm at 20 milliamperes DC.
Life Cycling (No Load) - Switches will be operative after 10,000 (minimum) cycles at the rate of 10 cycles per minute.
Life Cycling (Load) - Switches will be operative after 6000 (minimum) cycles at the rate of 10 cycles per minute at rated load

Care in Switch Installation
CW switches will perform properly if they are installed and used properly. Causes for failure often encountered in the field that are the responsibility of the user are:
  1. Removal of factory applied lubricants from switch contacts and moving parts.
  2. Introduction of foreign material into switching mechanism...flux, solder cleaning materials, potting compounds.
  3. Restriction of movement of switch button.
  4. Excessive heat often introduced while soldering.
  5. Switching loads in excess of rating.
Manufacturing Engineers are cautioned to avoid misusing switches and resultant switch failures.


Slide Switch Schematic
(PDF, 645KB)

GF-324-0032_2D DRAWING
(PDF, 352KB)

(STP, 674KB)

130 James Way - Southampton, PA 18966
215-355-7080 | fax: 215-355-1088 |
Legal | Sitemap | Catalog Index
© 2011 CW Industries - All Rights Reserved