CW INDUSTRIES
130 James Way
Southampton, PA 18966
Phone: 215-355-7080 • Fax: 215-355-1088
Email: info@cwind.com • Website: http://www.cwind.com
All Categories > Switches > Rocker Switches > Full Size Rocker Switches > 2000 Series Full Size Rocker Switches > 2000 Series Double-Pole Full Size Rocker Switches > Item # GR-2023A-0000  


Item # GR-2023A-0000, 2000 Series Double-Pole Full Size Rocker Switches





Check Distributor Stock  · Specifications  · Materials  · Operating Standards

Check Distributor Stock

Check Distributor Stock
PEERLESS ELECTRONICS
DIGI-KEY


Specifications

Circuitry
DPDT-CO

Switch Function
ON-OFF-ON

Electrical Ratings1
1/2 HP @ 125-250 VAC
10 A @ 250 VAC
13 A @ 125 VAC
5 A @ 14 V (T)
6 A @ 125 V (L)

Panel Opening
1.071 X .872 in
27.20 X 22.15 mm

Mounting
No tools or hardware required. Snaps into 1.071" (27.20 mm) x 0.872" (22.15 mm) panel cutout, as shown on drawing. Acceptable panel thickness 0.025" (0.64 mm) to 0.150" (3.81 mm).

CAUTION: Burr direction must be away from direction of insertion.

Mounting Polarization
No

Actuator Color
Black

Housing Color
Black

Actuator Legend
None

Illumination
Non Illuminated

Insulating Barriers
(X) Between Poles   ( _ ) Between Terminals   ( _ ) No Barriers

Terminal
0.250 x 0.032 in.     
6.35 x 0.81 mm.  
Quick Connect

Contact Action
Sliding with Self Cleaning Contacts

Listing Agency
(Consult drawing or factory for specific rating)2

Compliance
1 All ratings are based on a load per pole, opposite polarity basis. Additional ratings may be available, contact us for more information.
2 Due to ongoing advancements, additional agency certifications may be available, contact us for more information.


Materials

Rocker Knob
Nylon 94V-2

Housing
Nylon 94V-2

Terminal & Moving Contact
Copper Alloy or
Copper Alloy Silver Plated


Operating Standards
Endurance:
100,000 cycles, no load, minimum
25,000 cycles at rated load minimum
Contact Resistance:
Less than 0.01 Ω at 10 mA
Operating Temperature:
From -20ºC to 105ºC maximum.
Consult factory for higher or lower temperature ranges.
High Voltage Dielectric Withstanding Voltage:
2,500 V, 60 Hz for 1 minute between mounting surface and circuit connections (min.)
Relative Humidity:
Insulation resistance > 103 MΩ after 100 hours at 95% R.H. and 50ºC followed by 1 hour dry at ambient room conditions

Operating Standards described herein are general specifications that vary depending on the switch construction specified and end application. Contact us for specifications for specific models. Specifications subject to change without notice.



Print Back