CW INDUSTRIES
130 James Way
Southampton, PA 18966
Phone: 215-355-7080 • Fax: 215-355-1088
Email: info@cwind.com • Website: http://www.cwind.com
All Categories > Switches > Rocker Switches > Full Size Rocker Switches > 2000 Series Full Size Rocker Switches > 2000 Series Illuminated Full Size Rocker Switches > Item # GRL-2011-0000  


Item # GRL-2011-0000, 2000 Series Illuminated Full Size Rocker Switches





Check Distributor Stock  · Specifications  · Materials  · Operating Standards

Check Distributor Stock

Check Distributor Stock
DIGI-KEY


Specifications

Circuitry
SPST

Switch Function
ON-OFF

Electrical Ratings1
12 (6) A @ 250~ (VDE)
12 A @ 250 VAC
16 A @ 125 VAC
3/4 HP @ 125-250 VAC

Mounting
Snaps easily into a 0.550" (13.97 mm) x 1.125" (28.58 mm) panel cutout ranging in thickness from 0.025" (0.64 mm) to 0.170" (4.32 mm). No need for tools or additional hardware.

CAUTION: Burr direction must be away from the direction of insertion.

Mounting Polarization
None

Actuator Color
Red

Actuator Legend
None

Illumination
Illuminated - Neon 125V

Housing Color
Black

Insulating Barriers
( _ ) Between Terminals   ( X ) No Barriers

Terminal
0.250 x 0.032in.      6.35 x 0.81mm.   Quick Connect

Contact Action
Sliding with Self Cleaning Contacts

Listing Agency
(Consult drawing or factory for specific rating)2

Compliance
1 Additional ratings may be available, contact us for more information.
2 Due to ongoing advancements, additional agency certifications may be available, contact us for more information.


Materials

Rocker Knob
Translucent Nylon 6/6 (Optional)
Transparent Polycarbonate (Standard)

Rocker Lamp
High intensity neon lamp type A1C with 1/4 watt 22 kΩ resistor, with 10,000 hours of life for 125 volt applications (Standard)

Housing & Terminal Board
Nylon 94V-2

Terminal & Moving Contact
Copper


Operating Standards
Endurance:
100,000 cycles, no load, minimum
25,000 cycles at rated load minimum
Contact Resistance:
Less than 0.01 Ω at 10 mA
Operating Temperature:
From -20ºC to 105ºC maximum.
Consult factory for higher or lower temperature ranges
High Voltage Dielectric Withstanding Voltage:
2,500 V, 60 Hz for 1 minute between mounting surface and circuit connections (min.)
Relative Humidity:
Insulation resistance > 103 MΩ after 100 hours at 95% R.H. and 50ºC followed by 1 hour dry at ambient room conditions

Operating Standards described herein are general specifications that vary depending on the switch construction specified and end application. Contact us for specifications for specific models. Specifications subject to change without notice.



Print Back