CW INDUSTRIES
130 James Way
Southampton, PA 18966
Phone: 215-355-7080 • Fax: 215-355-1088
Email: info@cwind.com • Website: http://www.cwind.com
All Categories > Switches > Push Button Switches > GPB Series Push Button Switches > Item # GPB554BSERIES  


Item # GPB554BSERIES, GPB Series Push Button Switches





Check Distributor Stock  · Specifications  · Operating Standards

Check Distributor Stock

Check Distributor Stock
DIGI-KEY


Specifications

Circuitry
SPST

Switch Function
OFF-ON

Electrical Ratings
3 A @ 28 VDC
6 A @ 14 VDC

Actuator Color
Black
Red

Actuator Height
6.000

Mounting
Snap in

Orientation
Top

Terminations
Solder

Illumination
Non Illuminated

Options
Illuminated (LED)
Non-Illuminated

Cut-Out
0.7~3 mm max. thickness material ΓΈ12.1 hole with Keyway

Fitting
Snap-In

Material/Features
Frames are nylon (UL flame: 94V-2). Terminals are silver plated brass. Illuminated actuators are molded in PC. available with red, amber and green. Momentary function available.

Terminal
Solder (SQ)


Operating Standards
Endurance:
10,000 cycles at no load minimum
6,000 cycles at rated load minimum
Contact Resistance:
Less than 100 mOhms (5 V, 1A DC)
Operating Temperature:
From -20ºC to 85ºC maximum.
Insulation resistance:
Greater than 100 m Ohms (500 V DC between the open contacts)

Operating Standards described herein are general specifications that vary depending on the switch construction specified and end application. Contact us for specifications for specific models. Specifications subject to change without notice.



Print Back